HK Wentworth Ltd formerly Dancap Electronics
CONTACT US | SOLDERING | DESOLDERING | SOLDER POTS
THERMOMETERS | OTHER PRODUCTS | USEFUL LINKS | TERMS
TEL: 01530 448950 EMAIL: firstname.lastname@example.org
HAKKO FR810B-17 SMD DIGITAL REWORK STATION
WITH VACUUM PICK UP FUNCTION.
High power & large volume hot air for quick removal of
A tool that can provide powerful hot airflow for repairing high heat
capacity circuit boards that require high blow volume and high output
and sufficient hot airflow for appropriate blow volume and high
output for high density mounting substrates.
The FR810B's high volume airflow and high output make
it possible to perform the same work in only one third
of the time required when using a conventional model.
This reduces the thermal impact on boards and components.
Examination of time taken for connector sections soldered
onto a ceramic board to be heated to 200 degees C with
maximum temperature and airflow settings selected.
Single nozzles with an approximate 4mm
diameter were used.
Improvements of FR810B.
On top of the features of the FR810, high power and large
air volume, the new functions of vacuum pick up and
pick up indicator have been given to the FR810B.
The 2 new functions make it possible to remove
a component without damaging the PCB.
Vacuum Pick Up Function.
The vacuum pick up function is to pick up a component
with a suction pad and vacuum. It will pick up a
component only after the hot air melts the solder joints.
This can avoid an error to peel off the land by
removing a component with excessive force.
Pick Up Indicator.
By pre setting the pick up function, a component can be
picked up automatically when the solder has melted.
Then, the indication comes up and the moment of
picking up will be visible.
Even a component and solder joints cannot be seen as
covered by a nozzle, easy & safe pick up is possible.
Simple nozzle rewmoval and easy maintenance.
Nozzles can be quickly changed for many different types of
components. In addition, conventional nozzles are compatible.
Heating elements can also be easily and securely replaced.
A new timer function allows for repeatable and
consistent work times.
This can help to prevent parts from overheating and
can improve the overall quality of your work.
Chain presets function for making a simple thermal
The chain presets function is to make a simple thermal profile
by combining several preset conditions (Up tp 5 steps).
This can improve work efficiency a lot by standardizing work
time, avoiding overheating, improving repeatability of
operation and making difficult rework jobs easy.
Auto sleep and auto shut off features.
To ensure safety and conserve power, when the handpiece
is placed in the handpiece holder, the auto sleep function
is activated and it starts cooling automatically.
If the handpiece has not been removed from the handpiece
holder (example - using it in a rework fixture) and after
it has been idle for 30 minutes, auto shut off function is
activated. It is automatically powered off.
Access to these settings can be restricted via the
password function for easy management.